1. reach GMP standard
2.PLC control easy operation
3.Quality is stable
Item ModelPG-L-
5
25
50
100
150
200
500
800
1000
2000
3000
4500
6500
Inlet temperature
140-350°c, automatically controlled
Outlet temperature
80-90°c, automatically controlled
Atomization power
air
Motormechanical drive or frequency stepless control
Water evaporationKg/h
5
25
50
100
150
200
500
800
1000
2000
3000
4500
6500
Speed
of atomizerr.p.m
25000
22000
21500
18000
16000
12000-13000
11000-12000
Diameter of atomizing traymm
60
120
150
180210
In accordance with technical requirements
Max power of electric heater Kw
8
31.5
60
81
99
Equipped with other heat source
Product recovery rate %
≥95°c
Length(m)
1.6
In accordance with the flow chart,condition of field and requirements of customer
Width ( m)
1.1
Height of towerm
1.75
Hoisting height of nozzlem
-
2.5
2.5
3.2
Notes: above data for reference only.Water evaporation capacity is concerned with material characteristics,solid content and temperature of hot air inlet and outlet.Customers can choose the way of heating in accordance with the condition of local energy source and choose the way of dust removing by characteristics of raw material.
Tuesday, September 6, 2011
Mobile UV curing machine
Portable UV light solid machine
Technical data
A, equipment name: portable UVH light solid machine
Second, this machine application:
S alien UV solidify, prototype, handicraft molding etc.
S suitable for UV glue, laboratory and temporary simple construction maintenance.
Third, the machine features:
S this machine appearance, small volume light weight, saving space, widely applicable quality is reliable, the use of safe, convenient operation.
S this machine can move work, optional the gender is strong, flexible and shortcoming is relatively low efficiency.
S import light reflector, the biggest refraction UV light, strengthen dry curing effect.
S advanced cooling system, ensure the temperature effect, prolong lamp by the using life.
Four, main technical parameters:
1, irradiation distance: 80-200mm;
2 and powe r density: 80-120W/cm;
Three, spectral peak: 365nm;
4, tube: high-pressure mercury lamps, 250W;
5, cooling way: air-cooling exhaust;
6 and light measurement range: 1000-9500mJ/cm2
7, power: AC 200/220V, 45-60HZ;
8, UV lamp power: 250W;
9, tube presidents: 100mm;
10, tube luminous area: 35mm;
11, lamp life: 800H;
12 and packing size: 400L * * * * * 310W 250H;
Technical data
A, equipment name: portable UVH light solid machine
Second, this machine application:
S alien UV solidify, prototype, handicraft molding etc.
S suitable for UV glue, laboratory and temporary simple construction maintenance.
Third, the machine features:
S this machine appearance, small volume light weight, saving space, widely applicable quality is reliable, the use of safe, convenient operation.
S this machine can move work, optional the gender is strong, flexible and shortcoming is relatively low efficiency.
S import light reflector, the biggest refraction UV light, strengthen dry curing effect.
S advanced cooling system, ensure the temperature effect, prolong lamp by the using life.
Four, main technical parameters:
1, irradiation distance: 80-200mm;
2 and powe r density: 80-120W/cm;
Three, spectral peak: 365nm;
4, tube: high-pressure mercury lamps, 250W;
5, cooling way: air-cooling exhaust;
6 and light measurement range: 1000-9500mJ/cm2
7, power: AC 200/220V, 45-60HZ;
8, UV lamp power: 250W;
9, tube presidents: 100mm;
10, tube luminous area: 35mm;
11, lamp life: 800H;
12 and packing size: 400L * * * * * 310W 250H;
metallurgy equipment/drying sand machine /Drying machinery
Dryer/Drying machine
1)Superior quality
2)First-class materials
3)Stable performance
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it fall s. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed(r/m)
Power(kw)
Weight (T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1 .5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
1)Superior quality
2)First-class materials
3)Stable performance
The dryer is a type of industrial dryer employed to reduce or minimize the liquid moisture content of the material it is handling by bringing it into direct contact with a heated gas. The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it fall s. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Model
Specifications
Speed(r/m)
Power(kw)
Weight (T)
Diameter (m)
Length
(m)
Gradient
(%)
Φ1×12M
1.0
12
5
6.2
7.5
13.2
Φ1.2×12M
1.2
12
5
5.99
11
15.7
Φ1.2×14M
1.2
14
5
3.99
11
17.3
Φ1.5×12M
1 .5
12
5
4.02
15
17.4
Φ1.8×14M
1.8
14
5
4.59
18.5
27.2
Φ1.8×16M
1.8
16
5
5.48
22
39.6
Φ2.0×14M
2.0
14
5
4.59
18.5
31.6
Φ2.0×16M
2.0
16
5
4.59
30
43.9
Φ2.2×14M
2.2
14
5
4.59
22
37.4
Φ2.2×27M
2.2
27
5
4.58
37
79.2
Φ2.4×14M
2.4
14
5
3.6
30
46.2
Φ2.4×18M
2.4
18
5
3.12
37
66.7
Φ2.8×18M
2.8
18
5
3.12
45
89.3
Φ3.0×20M
3.0
20
5
3.67
55
95.5
Φ3.2×22M
3.2
22
5
3.4
75
141.6
Φ3.6×25M
3.6
25
5
3.1
110
188.6
SINON Machinery Manufacturing Co,.Ltd
Address:North of Yong'an Road,Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
Grinding mill/Mining machine/Ball mill
Ball mill
1)Stable performance
2)High quality materials
3)Exquisite workmanship
Ball mill is widely used in metal and nonmetal beneficiation plant, chemical industry, construction industry, etc, for the use of material grinding. Wet grid ball mill (water washing) is used for wet grinding all hardness material.
The machine is mainly composed by feeding part,cylinder part,and discharging part such working part and transsion part like bearing section, transmission section, reducer part and coupling. It is promoted and designed in the basis of old style ball mill, and the traditional sliding bearing in main bearing has been replaced to tapered roller bearing which can be self-aligning , make up for the position error of bearing installation and make sure the cylinder running steady. Because of sliding replace to rolling, friction for ce is reduced,transmission efficiency is promoted, energy consumption is reduced, and production efficiency is higher.
Technical Data Sheet
Model
Speed
(r/min)
Loadage
(t)
Feeding size
(mm)
Discharge size
(mm)
Output
Power
(kw)
Weight
(t)
(t/h)
900×1800
3638
1.5
≤20
0.075-0.89
0.65-2
18.5
4.6
900×3000
36
2.7
≤20
0.075-0.89
1.1-3.5
22
5.6
1200×2400
36
3
≤25
0.075-0.6
1.5-4.8
30
12
1200×3000
36
3.5
≤25
0.074-0.4
1.6-5
37
12.8
1200×4500
32.4
5
≤25
0.074-0.4
1.6-5.8
55
13.8
1500×3000
29.7
7.5
≤25
0.074-0.4
2-5
75
15.6
1500×4500
27
11
≤25
0.074-0.4
3-6
110
21
1500×5700
28
12
≤25
0.074-0.4
3.5-6
130
24.7
1830×3000
25.4
11
≤25
0.074-0.4
4- 10
130
28
1830×4500
25.4
15
≤25
0.074-0.4
4.5-12
155
32
1830×6400
24.1
21
≤25
0.074-0.4
6.5-15
210
34
1830×7000
24.1
23
≤25
0.074-0.4
7.5-17
245
36
2100×3000
23.7
15
≤25
0.074-0.4
6.5-36
155
34
2100×4500
23.7
24
≤25
0.074-0.4
8-43
245
42
2100×7000
23.7
26
≤25
0.074-0.4
8-48
280
50
2200×4500
21.5
27
≤25
0.074-0.4
9-45
280
48.5
2200×6500
21.7
35
≤25
0.074-0.4
14-26
380
52.8
2200×7000
21.7
35
≤25
0.074-0.4
15-28
380
54
2200×7500
21.7
35
≤25
0.074-0.4
15-30
380
56
2400×3000
21
23
≤25
0.074-0.4
7-50
245
54
2400×4500
21
30
≤25
0.074-0.4
8.5-60
320
65
2700×4000
20.7
40
≤25
0.074-0.4
12-80
400
94
2700×4500
20.7
48
≤25
0.074-0.4
12-90
430
102
3200×4500
18
65
≤25
0.074-0.4
800
137
SINON Machinery Manufacturing Co., Ltd.
Address in North of Yong’an Road, Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
1)Stable performance
2)High quality materials
3)Exquisite workmanship
Ball mill is widely used in metal and nonmetal beneficiation plant, chemical industry, construction industry, etc, for the use of material grinding. Wet grid ball mill (water washing) is used for wet grinding all hardness material.
The machine is mainly composed by feeding part,cylinder part,and discharging part such working part and transsion part like bearing section, transmission section, reducer part and coupling. It is promoted and designed in the basis of old style ball mill, and the traditional sliding bearing in main bearing has been replaced to tapered roller bearing which can be self-aligning , make up for the position error of bearing installation and make sure the cylinder running steady. Because of sliding replace to rolling, friction for ce is reduced,transmission efficiency is promoted, energy consumption is reduced, and production efficiency is higher.
Technical Data Sheet
Model
Speed
(r/min)
Loadage
(t)
Feeding size
(mm)
Discharge size
(mm)
Output
Power
(kw)
Weight
(t)
(t/h)
900×1800
3638
1.5
≤20
0.075-0.89
0.65-2
18.5
4.6
900×3000
36
2.7
≤20
0.075-0.89
1.1-3.5
22
5.6
1200×2400
36
3
≤25
0.075-0.6
1.5-4.8
30
12
1200×3000
36
3.5
≤25
0.074-0.4
1.6-5
37
12.8
1200×4500
32.4
5
≤25
0.074-0.4
1.6-5.8
55
13.8
1500×3000
29.7
7.5
≤25
0.074-0.4
2-5
75
15.6
1500×4500
27
11
≤25
0.074-0.4
3-6
110
21
1500×5700
28
12
≤25
0.074-0.4
3.5-6
130
24.7
1830×3000
25.4
11
≤25
0.074-0.4
4- 10
130
28
1830×4500
25.4
15
≤25
0.074-0.4
4.5-12
155
32
1830×6400
24.1
21
≤25
0.074-0.4
6.5-15
210
34
1830×7000
24.1
23
≤25
0.074-0.4
7.5-17
245
36
2100×3000
23.7
15
≤25
0.074-0.4
6.5-36
155
34
2100×4500
23.7
24
≤25
0.074-0.4
8-43
245
42
2100×7000
23.7
26
≤25
0.074-0.4
8-48
280
50
2200×4500
21.5
27
≤25
0.074-0.4
9-45
280
48.5
2200×6500
21.7
35
≤25
0.074-0.4
14-26
380
52.8
2200×7000
21.7
35
≤25
0.074-0.4
15-28
380
54
2200×7500
21.7
35
≤25
0.074-0.4
15-30
380
56
2400×3000
21
23
≤25
0.074-0.4
7-50
245
54
2400×4500
21
30
≤25
0.074-0.4
8.5-60
320
65
2700×4000
20.7
40
≤25
0.074-0.4
12-80
400
94
2700×4500
20.7
48
≤25
0.074-0.4
12-90
430
102
3200×4500
18
65
≤25
0.074-0.4
800
137
SINON Machinery Manufacturing Co., Ltd.
Address in North of Yong’an Road, Gongyi city,Henan Province,China
Tel +8637169537555
+8637164373688
Fax +8637164373899
vibration fluid bed drying machine
1.GMP standard
2. continue drying products.
3. SUS304, SUS316,SUS316L and other materials .
4.xylitol dryer
1, Raw material is heated evenly and heat exchange is fully used and dry capacity is high. Compared with ordinary drier, the energy can be saved about 30%.
2, The vibration is created by motor. It is stable in operation and convenient in maintenance, low noise and long life.
3, The fluidized state is stable and no dead angle and phenomenon of broken out.
4, It is good in regulation and wide in suitability.
5, It is small for damaging the surface of raw material. The equipment can be used for drying raw materials that are easy broken. The drying effect can not be affected even if raw material gave anomalous shape.
6, It is effective to prevent from cross pollution between raw material and air because the equipment adopts fully closed structure. The environment of operation is clean.
2. continue drying products.
3. SUS304, SUS316,SUS316L and other materials .
4.xylitol dryer
1, Raw material is heated evenly and heat exchange is fully used and dry capacity is high. Compared with ordinary drier, the energy can be saved about 30%.
2, The vibration is created by motor. It is stable in operation and convenient in maintenance, low noise and long life.
3, The fluidized state is stable and no dead angle and phenomenon of broken out.
4, It is good in regulation and wide in suitability.
5, It is small for damaging the surface of raw material. The equipment can be used for drying raw materials that are easy broken. The drying effect can not be affected even if raw material gave anomalous shape.
6, It is effective to prevent from cross pollution between raw material and air because the equipment adopts fully closed structure. The environment of operation is clean.
Energy saving silica rotary drier with favorable price
Silica rotary drier:
1.hot sell in russia and russia
2.ISO9001:2008 and CE approved
3.suitable for cement ,coal ,ore
Silica rotary drier
Silica rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
Components:
Silica rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment). Rotary drier manufactured by us adopts ne w lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.
Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Parameters:
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kw)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x80 00
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2400x20000
3-5
1.5-5
≤800
37
18-30
60
3000x20000
3-5
1.5-5
≤800
55
25-35
78
3000x25000
3-5
1.5-5
≤800
75
32-40
104.9
After-sale services
Provide considerate services to minimize clients' worries.
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site;
(4) Examine the equipment regularly;
(5)Take initiative to eliminate the troubles rapidly at site;
(6) Distribute the guarantee fittings door-to-door;
(7)provide perfect service;
(8)Provide technical exchanging;
(9)Provide maintenance for big items.
Inside of rotary drier
1.hot sell in russia and russia
2.ISO9001:2008 and CE approved
3.suitable for cement ,coal ,ore
Silica rotary drier
Silica rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
Components:
Silica rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment). Rotary drier manufactured by us adopts ne w lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.
Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Parameters:
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kw)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x80 00
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2400x20000
3-5
1.5-5
≤800
37
18-30
60
3000x20000
3-5
1.5-5
≤800
55
25-35
78
3000x25000
3-5
1.5-5
≤800
75
32-40
104.9
After-sale services
Provide considerate services to minimize clients' worries.
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site;
(4) Examine the equipment regularly;
(5)Take initiative to eliminate the troubles rapidly at site;
(6) Distribute the guarantee fittings door-to-door;
(7)provide perfect service;
(8)Provide technical exchanging;
(9)Provide maintenance for big items.
Inside of rotary drier
2011 the most cheap bagasse dryer made in China
Expert badasse dryer:
1.Time delivery in 10 days
2.Under technician's guidance
3.Manufacturer of coal dryer
4.OEM service..
Bagasse Dryer:
Indirect dryer can be heated direct or indirect; the heating efficiency can be up to 95%.
Indirect dryer operating under high temperature and low oxygen to avoid materials being self burning or exploding when drying. Big drying capacity, highly industrialization and low cost.
Sterilization
Bagasse dryer main applicable area:
1. The coal industry coal, coal with flotation, drying mixed coal and other materials drying;
2, the construction industry blast furnace slag, clay, limestone, sand, quartz and other materials drying;
3, processing industry, metal concentrates, slag, tailings and other materials drying;
The working principle of bagasse dryer:
I produced a rota ry kiln system and equipment through technology innovation, the system used in the most advanced hydraulic gear wheel device, adopts the high precision measurement of piston pump, high precision control valve and contact graphite block seals and other advanced technologies.
To improve the degree of automation, an industry watch TV Kiln fire, process simulation screen, burning zone by infrared scanning apparatus to Duanshao calcined with a direct reflection of the computers.
Thermal stability of the system, improved equipment operation rate, compared with the same specifications of equipment, operating rate of 10%, yield 5% -10%, 15% lower heat consumption.
Technical parameters of bagasse dryer
Specific-ations(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L1-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L7-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L7-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
The bagasse dryer pictures for your reference:
1.Time delivery in 10 days
2.Under technician's guidance
3.Manufacturer of coal dryer
4.OEM service..
Bagasse Dryer:
Indirect dryer can be heated direct or indirect; the heating efficiency can be up to 95%.
Indirect dryer operating under high temperature and low oxygen to avoid materials being self burning or exploding when drying. Big drying capacity, highly industrialization and low cost.
Sterilization
Bagasse dryer main applicable area:
1. The coal industry coal, coal with flotation, drying mixed coal and other materials drying;
2, the construction industry blast furnace slag, clay, limestone, sand, quartz and other materials drying;
3, processing industry, metal concentrates, slag, tailings and other materials drying;
The working principle of bagasse dryer:
I produced a rota ry kiln system and equipment through technology innovation, the system used in the most advanced hydraulic gear wheel device, adopts the high precision measurement of piston pump, high precision control valve and contact graphite block seals and other advanced technologies.
To improve the degree of automation, an industry watch TV Kiln fire, process simulation screen, burning zone by infrared scanning apparatus to Duanshao calcined with a direct reflection of the computers.
Thermal stability of the system, improved equipment operation rate, compared with the same specifications of equipment, operating rate of 10%, yield 5% -10%, 15% lower heat consumption.
Technical parameters of bagasse dryer
Specific-ations(m)
Capacity(t/h)
Main motor
Main gear box
Weight(t)
Power(kw)
Model
Model
Speed reduction ratio
Ø1.2*10
2.5
7.5
Y160M-R3
ZL50-16-I
-----
13.5
Ø1.5*12
3.3-4.9
10
Y160L-6-B3
JZQ500-III-2F
-----
18.9
Ø1.5*15
4-6
18.5
Y200L1-6
JZQ500-III-2F
-----
21
Ø1.8*12
4-6
18.5
Y160L-6
ZQ50-16II-2
16.46
22.83
Ø2.2*12
7-12
18.5
Y200L7-6
JZQ650-III
31.5
37.6
Ø2.2*14
7-12
22
Y200L7-6
JZQ650-III
31.5
40
Ø2.2*16
12
30
Y225M-6
JZQ750-III
31.5
45
Ø2.4*14
12
30
Y250M-6
JZQ750-III
31.5
51
Ø2.4*18
10-13
37
Y250M-6
ZL85-13-I
27.16
54
Ø2.4*20
10-14
37
Y250N-6
ZL85-13-I
27.16
54.14
Ø3*20
25
55
Y250M-4
ZL100-16-I
41.52
78
Ø3*25
32-36
75
YR280M-4
ZL100-16-I
41.52
104.9
The bagasse dryer pictures for your reference:
wood sawdust dryer with one stove HJ-3
Wood Sawdust Dryer can dry many raw materials quickly ,save energy for you.
I. Brief Introduction:
Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
II. Technical Details
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation .
3. Regarding HGJ-I and HGJ-II Type Dryer ,it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.
4. Regarding HGJ-III,it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
III. Technical Data
1. Model: HGJ-I Type Dryer (with one stove)
Capacity (Kg/hour): 400kg/h
Size of Input material (Diameter) mm: < 3 & < 5
Temperature of Hot Air: 180°C~250°C
Power(Kw):4
Gross/Net Weight(Kg):1300/1200
Overall Dimension (L*W*H) m:10*1.0*2.0m
Packing Dimension (mm) :2440*1220*2150
Overall Dimension (L*W*H) m:15*1.4*2.5m
I. Brief Introduction:
Sawdust Dryer is suitable for dry the grain, sawdust, etc small granular materials. It can dry the raw materials quickly and with higher capacity.
II. Technical Details
1. For raw materials with heavy humidity which is above 12%, you need to install a Dryer before further processing. This Air Current Type Dryer can reduce the humidity of wood materials below 12% per time. The Cost of this Air Current Dryer is much lower than Rotary Dryer.
2. It is professionally designed for drying different kinds of wood sawdust. It has advantages of low cost, low consumption, high capacity, easy operation and maintainace, etc. In addition, the round places of pipes can be changed to any angle which can save space and solve plant dimension limitation .
3. Regarding HGJ-I and HGJ-II Type Dryer ,it is suitable to process materials which moisture content between 20%-25%.It can reduce the MS to 8%-12% one drying time.
4. Regarding HGJ-III,it is suitable to process materials which moisture content between 35%-50%.It can reduce the humidity to 8%-12% one drying time. That means it can reduce approx.30% for one drying time. But if the humidity of materials is lower than 35%, the capacity will be increased with less of fuel.
5. All of round places can be adjusted to any angle of 360 centigrade degree according to operation request. Clients can change the angle of dryers base on the production field.
III. Technical Data
1. Model: HGJ-I Type Dryer (with one stove)
Capacity (Kg/hour): 400kg/h
Size of Input material (Diameter) mm: < 3 & < 5
Temperature of Hot Air: 180°C~250°C
Power(Kw):4
Gross/Net Weight(Kg):1300/1200
Overall Dimension (L*W*H) m:10*1.0*2.0m
Packing Dimension (mm) :2440*1220*2150
Overall Dimension (L*W*H) m:15*1.4*2.5m
High performance rotary drier
High performance rotary drier
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience
Best Seller Rotary Drier:
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of best seller rotary drier:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scatt ered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Drier
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
1.High reliability
2.Energy-saving
3.Robust structure
4.More than15 years experience
Best Seller Rotary Drier:
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380°) of the rotary drier.
The Working Principle of best seller rotary drier:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scatt ered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Specification of Rotary Drier
type(mm)
indiclination(%)
rotation speed(r/min)
input tempreture(ºC)
motor power(kw)
outpur(t/h)
weight(t)
GZΦ800×8000
5
7.5
≤700
4-6
0.8-2.0
3.5
GZΦ1000×10000
5
6.19
≤700
5.5-7.5
1.0-3.5
5.6
GZΦ1200×10000
5
5.3
≤700
11-13
1.8-5
14.04
GZΦ1500×12000
5
4.5
≤800
13-15
3.3-7.5
17.76
GZΦ1800×14000
5
3.3
≤800
18.5
5-9
29
GZΦ2200×120000
5
3.0
≤700
22
6-12
33
GZΦ2400×18000
5
2.5
≤800
30
10-15
53.3
Stable Performance Corn Grain Dryers(ISO Certificate)
Grain Dryer
1.Easy Operation
2.Stable performance
3.High quality dryer
4.ISO9001:2008
Stable Performance Corn Grain Dryer(ISO Certificate)
1.
Brief introduction of Grain dryer:
The products to process are imported from the top end via feeding device to ensure that the equipment will always be in the full load condition during operation.Through an inward reversed, non-bottomed and the joint role of staggered array processing and multi-V-shaped baffle makes the products to mix.Working as dry air access.The majority of dry air can be reused with very little fuel consumption.
2.Grain Dryer
Application:
Grain Dryer
is suitable for the cooking oil pellet,material drying processing,but matches the anthracite,the bitumious coal,the rice husk,the electricity,the steam,the liquid gas,day the however gas,the f uel oil heat source.
3.Grain Dryer performance characteristics:
1)Single plane open-air use,windproof rainproof.
2)The mechanized continued operation,the stable property,the ease of operation,saves the construction to invest.
3)Adaptiveness,may give dual attention dries the multi-variety grain.
4)The afterheat recycling use,reduces the energy consumption.
5)he grain heat-drying is thorough,is even,the drying grain may go into storage directly.
6)After drying,the grain quality is good,does not have the pollution.
4.
Technical parameters:
Model
WGH100
WGH150
WGH200
WGH250
WGH300
WGH400
WGH500
Process load
100
150
200
250
300
400
500
Precipitation scope(%)
4~16
Heating medium
Clean air
Hot-blast temperature(°C)
< 120
Grain highest heating temperature(°C)
55
Dry irregularity (%)
< 2
Percentage of damage increment(%)
< 0.5
The unit consumes hotly
(kj/kgH
2
O)
5800
Coal consumption(sign coal)(kg/h)
60~230
90~345
120~460
150~575
180~690
240~1000
300~1380
Installment capacity
according to the environment,condition
Main engine external dimensions(M)
4×3
4×3
5×3.2
5.5×3.2
5.5×4
5.5×4.5
6×6
Main engine altitude(M)
6~1
8~15
13~17.5
14~18
14~19
15~20
16~22
Note:
This specification is just for reference, any changes are subject to the products.
After sales:
The company send technical personnel to install and debug the equipment and training operators,we can design and manufacture the products according to customer's special requirements.
Solemn promise:
The local machine warranty one year(except wearing parts).
Contact Information:
T:+8615039084793
+86-0371-67520662
1.Easy Operation
2.Stable performance
3.High quality dryer
4.ISO9001:2008
Stable Performance Corn Grain Dryer(ISO Certificate)
1.
Brief introduction of Grain dryer:
The products to process are imported from the top end via feeding device to ensure that the equipment will always be in the full load condition during operation.Through an inward reversed, non-bottomed and the joint role of staggered array processing and multi-V-shaped baffle makes the products to mix.Working as dry air access.The majority of dry air can be reused with very little fuel consumption.
2.Grain Dryer
Application:
Grain Dryer
is suitable for the cooking oil pellet,material drying processing,but matches the anthracite,the bitumious coal,the rice husk,the electricity,the steam,the liquid gas,day the however gas,the f uel oil heat source.
3.Grain Dryer performance characteristics:
1)Single plane open-air use,windproof rainproof.
2)The mechanized continued operation,the stable property,the ease of operation,saves the construction to invest.
3)Adaptiveness,may give dual attention dries the multi-variety grain.
4)The afterheat recycling use,reduces the energy consumption.
5)he grain heat-drying is thorough,is even,the drying grain may go into storage directly.
6)After drying,the grain quality is good,does not have the pollution.
4.
Technical parameters:
Model
WGH100
WGH150
WGH200
WGH250
WGH300
WGH400
WGH500
Process load
100
150
200
250
300
400
500
Precipitation scope(%)
4~16
Heating medium
Clean air
Hot-blast temperature(°C)
< 120
Grain highest heating temperature(°C)
55
Dry irregularity (%)
< 2
Percentage of damage increment(%)
< 0.5
The unit consumes hotly
(kj/kgH
2
O)
5800
Coal consumption(sign coal)(kg/h)
60~230
90~345
120~460
150~575
180~690
240~1000
300~1380
Installment capacity
according to the environment,condition
Main engine external dimensions(M)
4×3
4×3
5×3.2
5.5×3.2
5.5×4
5.5×4.5
6×6
Main engine altitude(M)
6~1
8~15
13~17.5
14~18
14~19
15~20
16~22
Note:
This specification is just for reference, any changes are subject to the products.
After sales:
The company send technical personnel to install and debug the equipment and training operators,we can design and manufacture the products according to customer's special requirements.
Solemn promise:
The local machine warranty one year(except wearing parts).
Contact Information:
T:+8615039084793
+86-0371-67520662
Sunday, September 4, 2011
Rotary dryer equipment/ drying machine / dryer
Rotary Drier advantages:
1.Reasonable structure,
2.competitive price
3.energy saving
4.Suitable for many fields
Detail description:
Drier is a cylinder,its main body is a litte bit slantwise,and the rotate speed can be adjusted within bounds.Wet raw materials are sent into cylinder, the materials are well-distributed and dispersed after be turned over by shovelling plate,then the materials contact with the hot air fully,the drying is accerlated.Shovelling plate can be selected to meet different materials
This dryer is particularly suitable for drying big granules in chemicalindustry,minerals,metallurgy industry,and so on.It can also dry special powder and granule material,such as lightweight calcium carbonate,floridin,magnetic particle,graphite,and dregs of a decoction ,the drying temerature should be low, and the raw material should be dried continuously in large scale.
technical parameter
item(m)
priductive capacity(t/h)
revolution(r/min)
motor power(Kw)
install angle(
.
)
Temp.of final
Φ1.0×5.0
0.5-1.2
0.6-6
4
3-5
≤1.5%
Φ1.2×6-10
1.5-3
0.6-6
5.5
3-5
≤1.5%
Φ1.5×12-18
3-5.5
0.6-6
15
3-5
≤1.5%
Φ1.8×12-18
5-6.5
0.6-6
18.5
3-5
≤1.5%
Φ2.2×12-22
7-12
0.6-6
22
3-5
≤1.5%
Φ2.4×15-20
9-15
0.6-6
30
3-5
≤1.5%
Φ3.0×25
16
0.6-6
55
3-5
≤1.5%
model
heat direct and sequence
heat direct and retrograde
compound heating
type of material
mineral
HP
ammonium sulphate
phosphorus fertilizer
coal
capacity kg/h
1000
-66
15000
20000
12000
5000
primary moisture %
30
13
6
1.5
5
6.5final moisture %
15
0.3
1
0.1
0.1
0.1
average dim. mm
6.5
0.05
4.7
0.5-0.7
0.5
5
thickness of material mm
770
800
1890
1100
1500
750
capacity of hot air kg/h
39000
5400
10750
9800
6500
16000
temp. of air in
600
165
500
180
650
570
temp. of material out
42
100
70
80
75
heating style
gas
steam electric+heating
heavy oil
coal fuel furnace
heavy oil
heavy oil
ratio of feed
6.3
7
7.5
7.8
18
rotation speed rpm
4
4
3.5
3
4
2
angel
.
0.04
0.005
0.03
0.05
0.05
0.043
quatity of oar
12
24
12
22
8
16
6
12
dim. of drier m
2.0
1.5
2
2.3
2
0.84
24
0.95
length of drier m
20
12
17
15
10
16
driving power kw
22
7.5
15
11
11
15
Sinon Machinery Manufacturing Co., Ltd.
Address:North of Yong’an Road, Gongyi city,Henan Province,China
Tel:+8637169537555
+8637164373688
Fax:+8637164373899
Mobile:+86 15890105509
1.Reasonable structure,
2.competitive price
3.energy saving
4.Suitable for many fields
Detail description:
Drier is a cylinder,its main body is a litte bit slantwise,and the rotate speed can be adjusted within bounds.Wet raw materials are sent into cylinder, the materials are well-distributed and dispersed after be turned over by shovelling plate,then the materials contact with the hot air fully,the drying is accerlated.Shovelling plate can be selected to meet different materials
This dryer is particularly suitable for drying big granules in chemicalindustry,minerals,metallurgy industry,and so on.It can also dry special powder and granule material,such as lightweight calcium carbonate,floridin,magnetic particle,graphite,and dregs of a decoction ,the drying temerature should be low, and the raw material should be dried continuously in large scale.
technical parameter
item(m)
priductive capacity(t/h)
revolution(r/min)
motor power(Kw)
install angle(
.
)
Temp.of final
Φ1.0×5.0
0.5-1.2
0.6-6
4
3-5
≤1.5%
Φ1.2×6-10
1.5-3
0.6-6
5.5
3-5
≤1.5%
Φ1.5×12-18
3-5.5
0.6-6
15
3-5
≤1.5%
Φ1.8×12-18
5-6.5
0.6-6
18.5
3-5
≤1.5%
Φ2.2×12-22
7-12
0.6-6
22
3-5
≤1.5%
Φ2.4×15-20
9-15
0.6-6
30
3-5
≤1.5%
Φ3.0×25
16
0.6-6
55
3-5
≤1.5%
model
heat direct and sequence
heat direct and retrograde
compound heating
type of material
mineral
HP
ammonium sulphate
phosphorus fertilizer
coal
capacity kg/h
1000
-66
15000
20000
12000
5000
primary moisture %
30
13
6
1.5
5
6.5final moisture %
15
0.3
1
0.1
0.1
0.1
average dim. mm
6.5
0.05
4.7
0.5-0.7
0.5
5
thickness of material mm
770
800
1890
1100
1500
750
capacity of hot air kg/h
39000
5400
10750
9800
6500
16000
temp. of air in
600
165
500
180
650
570
temp. of material out
42
100
70
80
75
heating style
gas
steam electric+heating
heavy oil
coal fuel furnace
heavy oil
heavy oil
ratio of feed
6.3
7
7.5
7.8
18
rotation speed rpm
4
4
3.5
3
4
2
angel
.
0.04
0.005
0.03
0.05
0.05
0.043
quatity of oar
12
24
12
22
8
16
6
12
dim. of drier m
2.0
1.5
2
2.3
2
0.84
24
0.95
length of drier m
20
12
17
15
10
16
driving power kw
22
7.5
15
11
11
15
Sinon Machinery Manufacturing Co., Ltd.
Address:North of Yong’an Road, Gongyi city,Henan Province,China
Tel:+8637169537555
+8637164373688
Fax:+8637164373899
Mobile:+86 15890105509
vacuum freeze dryer
vacuum freeze dryer
FD-1C-80 is ultra-low temperature freeze-drying machine, freeze-dried samples for laboratory
vacuum freeze dryer
FD-1-80 series are ultra-low temperature freeze-drying machine, freeze-dried samples for laboratory or small-scale production.
Have these 5 types:
FD-1A-80 Normal Type
FD-1B-80 Gland Type
FD-1C-80 Normal Type with Hanging bottle
FD-1D-80 Gland Type with Hanging bottle
FD-1E-80 T-shaped multi-manifold device
Parameters:
Model
FD-1A-80
FD-1B-80
FD-1C-80
FD-1D-80
FD-1E-80
Condenser temperature (°C)
<-80
<-80
<-80
<-80
<-80
Vacuum degree
(Pa)
<20
<20
<20
<20
<20
Drying area
(m
2
)
0.12
0.07
0.12
0.07
—
Materials area
(L)
1.2
0.7
1.2
0.7
—
Catch water
(kg/24h)
4
4
4
4
4
Cold trap size
(mm)
Φ220*220
Φ220*220
Φ220*220
Φ220*220
Φ220*220
Sample plate
(mm)
Φ200
Φ180
Φ200
Φ180
—
Sample bottle
—
—
8
8
24
Power
220V/50Hz/1300W
Main size outside(mm)
490*540*800(W*D*H)
FD-1C-80 is ultra-low temperature freeze-drying machine, freeze-dried samples for laboratory
vacuum freeze dryer
FD-1-80 series are ultra-low temperature freeze-drying machine, freeze-dried samples for laboratory or small-scale production.
Have these 5 types:
FD-1A-80 Normal Type
FD-1B-80 Gland Type
FD-1C-80 Normal Type with Hanging bottle
FD-1D-80 Gland Type with Hanging bottle
FD-1E-80 T-shaped multi-manifold device
Parameters:
Model
FD-1A-80
FD-1B-80
FD-1C-80
FD-1D-80
FD-1E-80
Condenser temperature (°C)
<-80
<-80
<-80
<-80
<-80
Vacuum degree
(Pa)
<20
<20
<20
<20
<20
Drying area
(m
2
)
0.12
0.07
0.12
0.07
—
Materials area
(L)
1.2
0.7
1.2
0.7
—
Catch water
(kg/24h)
4
4
4
4
4
Cold trap size
(mm)
Φ220*220
Φ220*220
Φ220*220
Φ220*220
Φ220*220
Sample plate
(mm)
Φ200
Φ180
Φ200
Φ180
—
Sample bottle
—
—
8
8
24
Power
220V/50Hz/1300W
Main size outside(mm)
490*540*800(W*D*H)
high capacity rotary dryer
high capacity rotary dryer :
1.has reasonablre structure
2. convenient maintenance
3.ISO 9001:2008
4.low price
high capacity rotary dryer introduction
:
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380° ) of the rotary drier.
high capacity Rotary Dryer Components
:
Rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment ). Rotary drier manufactured by us adopts new lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.
high capacity Rotary Drier Working Principle
:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
we can provide full specifications of large and medium-sized mineral machinery, metallurgy equipment and building materials equipment, such as crushing machines, mineral processing equipment, cement production lines, rolling mill equipment, etc. These mining crusher machines are reliable in quality and low in cost. Welcome rotary drier manufacturer and purchasers all over the globe to contact us!
1.has reasonablre structure
2. convenient maintenance
3.ISO 9001:2008
4.low price
high capacity rotary dryer introduction
:
Rotary drier is widely used for drying materials in industries like cement, mine, building materials, chemistry, food and fertilizer, etc. This rotary drying machine comes with thermocouples on the feeding and discharging device to control the temperature. Thermometers are also adopted so as to better control the working temperature (generally 350-380° ) of the rotary drier.
high capacity Rotary Dryer Components
:
Rotary drier is mainly composed of cylinder, under frame, feeding and discharging devices, transmission device, gear cover, etc. (Optional auxiliary equipment includes combustion chamber, feeder and discharging device, and dust collection equipment ). Rotary drier manufactured by us adopts new lifting plate, which is of functions like guiding, current-sharing, and material raising. The materials are raised and evenly drop so that they are in full contact with heat for better drying efficiency. Our rotary drier is designed with the best working conditions, which enables it to save 10-15% of energy and increase 10-15% of productivity compared with common dryers.
high capacity Rotary Drier Working Principle
:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials are fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
we can provide full specifications of large and medium-sized mineral machinery, metallurgy equipment and building materials equipment, such as crushing machines, mineral processing equipment, cement production lines, rolling mill equipment, etc. These mining crusher machines are reliable in quality and low in cost. Welcome rotary drier manufacturer and purchasers all over the globe to contact us!
briquette vertical drying machine
coal dryer
1 dry the coals heat the adhesive up to the intensity
2.high efficiency
3.energy saving
briquette vertical drying machine
The specs and models of the vertical drying machines for coal ball.
ZZLG2200Y five tons or so per hour
ZZLG2600Y six tons or so per hour
ZZLG3000Y eight tons or so per hour
ZZLG3000Y twelve tons or so per hour
The process parameters of the vertical drying machines for coal ball
The water content in the coal-ball reaches 7-12% before the dryness
The water content in the coal-ball reaches 1.5- 3% after the dryness
Time for dryness 2 -2.5 hours
Temperature for dryness 150-250Celsuis
The power required 22kw.37kw.45kw
The hot blast oven consumers 50kg.70kg and 70kg coals per hour
Labors 3-5 per shift
1 dry the coals heat the adhesive up to the intensity
2.high efficiency
3.energy saving
briquette vertical drying machine
The specs and models of the vertical drying machines for coal ball.
ZZLG2200Y five tons or so per hour
ZZLG2600Y six tons or so per hour
ZZLG3000Y eight tons or so per hour
ZZLG3000Y twelve tons or so per hour
The process parameters of the vertical drying machines for coal ball
The water content in the coal-ball reaches 7-12% before the dryness
The water content in the coal-ball reaches 1.5- 3% after the dryness
Time for dryness 2 -2.5 hours
Temperature for dryness 150-250Celsuis
The power required 22kw.37kw.45kw
The hot blast oven consumers 50kg.70kg and 70kg coals per hour
Labors 3-5 per shift
Industrial dehumidifier (DH-1603B)
Industrial dehumidifier
VFD Dynamic Coloful Display Control
Defrost automatically
Industrial dehumidifier
Specification:
Voltage / Cycle: 220V-240V/50Hz
Power input (W): 2600w
Dehumidifying capacity: 168L/day
N/W (Kg): 137
Cryogen: R22/R407
Noise: less than 65dB
Maneuverability: 4 casters
Compressor: Rotary
Color: White
Body dimension (mm): 540*602*1962
Applied Area: 2.6-3m Height 170-200 sq.m.
Description:
* VFD Dynamic Coloful Display Control
* Upper front air outlet, lower front air inlet
* Defrost automatically when the ambient temperature is below 18 deg.c
* VFD coloful fluorescent dynamic display
* Drain consecutively
VFD Dynamic Coloful Display Control
Defrost automatically
Industrial dehumidifier
Specification:
Voltage / Cycle: 220V-240V/50Hz
Power input (W): 2600w
Dehumidifying capacity: 168L/day
N/W (Kg): 137
Cryogen: R22/R407
Noise: less than 65dB
Maneuverability: 4 casters
Compressor: Rotary
Color: White
Body dimension (mm): 540*602*1962
Applied Area: 2.6-3m Height 170-200 sq.m.
Description:
* VFD Dynamic Coloful Display Control
* Upper front air outlet, lower front air inlet
* Defrost automatically when the ambient temperature is below 18 deg.c
* VFD coloful fluorescent dynamic display
* Drain consecutively
drying tunnel
variety, structural diversity, wide range of uses
Introduction:
Line drying tunnel applicable to all types of objects through the hot air to dry after wet work.
Line body with stainless steel mesh or PVC belt running straight up and down cycle of closed-end way.
Electric heating temperature control air circulation, drying power operation for the object.
Use of a wide range of drying tunnel line, drying line for the metal, electroplating, chemical, packaging, electronics, leather, painting, screen printing, plastics, food and other industries.
Drying tunnel line features: drying tunnel line is warming rapidly, the product even heat, drying line can be sustainable with the continuous production of dried plant product line, drying line may also need to adjust the baking temperature by the production, transmission speed and time, can greatly increase production efficiency, using simple and convenient.
Drying tunnel line of the transmission mode: chain mesh, mesh belt, string rod, Teflon-type, belt type.
Heating method: heating pipe + transport wind, quartz tube heating, diesel burner heating, far infrared radiation heating.
Technical parameters:
(1) Dimensions: length 20 meters, outside the width of 0.8 m, 0.65 m in width, 1.3 meters high, 5 meters long feed section, drying section 12 meters long, a material part of a long 3 m; rack with
40 × 80 mm welded square pass, the line beam with 2 mm thick body made cold plate, spray (non-P injection) corrosion-resistant, easy to clean.
(2) drying parts: 6 section of the furnace liner, furnace ceiling height 0.28 meters, drying area 12 meters in length, liner made by 1.2mm galvanized plate, 60 mm high-temperature insulation to prevent rust
oxidation; bottom with insulation.
(3) electrical parts: power s upply 380V, 30A, three-phase five-wire system, power 40KW, using 2P benefit Taiwan's Love Frequency inverter 1.5KW, transmission speed of 0.5-8 m / min Adjustable; by Japan RKC Smart
thermostat, the temperature from room temperature to 250 °C adjustable, self-tuning PID function, automatic constant temperature, over-temperature power failure, over temperature settings, dual thermostat control, leakage protection function, the internal temperature difference of ± 3 degrees; other
Control circuit devices are controlled by Mitsubishi Electric; each piece of the furnace chamber air motor with 2 sets of transport, for a total of 12 units with 10-inch wheels shipped air damper, each loaded nine stainless steel heating pipes, each uniformly distributed in the furnace chamber 500KW
inside, each furnace temperature can be controlled separately, each piece easy to set different temperatures;
(4) Transmission parts: the use of imported stainless ste el mesh chain belt, head tail with active-passive conditioning drum, the middle has no power-dragging roller bearing to prevent the belt run edge.
Introduction:
Line drying tunnel applicable to all types of objects through the hot air to dry after wet work.
Line body with stainless steel mesh or PVC belt running straight up and down cycle of closed-end way.
Electric heating temperature control air circulation, drying power operation for the object.
Use of a wide range of drying tunnel line, drying line for the metal, electroplating, chemical, packaging, electronics, leather, painting, screen printing, plastics, food and other industries.
Drying tunnel line features: drying tunnel line is warming rapidly, the product even heat, drying line can be sustainable with the continuous production of dried plant product line, drying line may also need to adjust the baking temperature by the production, transmission speed and time, can greatly increase production efficiency, using simple and convenient.
Drying tunnel line of the transmission mode: chain mesh, mesh belt, string rod, Teflon-type, belt type.
Heating method: heating pipe + transport wind, quartz tube heating, diesel burner heating, far infrared radiation heating.
Technical parameters:
(1) Dimensions: length 20 meters, outside the width of 0.8 m, 0.65 m in width, 1.3 meters high, 5 meters long feed section, drying section 12 meters long, a material part of a long 3 m; rack with
40 × 80 mm welded square pass, the line beam with 2 mm thick body made cold plate, spray (non-P injection) corrosion-resistant, easy to clean.
(2) drying parts: 6 section of the furnace liner, furnace ceiling height 0.28 meters, drying area 12 meters in length, liner made by 1.2mm galvanized plate, 60 mm high-temperature insulation to prevent rust
oxidation; bottom with insulation.
(3) electrical parts: power s upply 380V, 30A, three-phase five-wire system, power 40KW, using 2P benefit Taiwan's Love Frequency inverter 1.5KW, transmission speed of 0.5-8 m / min Adjustable; by Japan RKC Smart
thermostat, the temperature from room temperature to 250 °C adjustable, self-tuning PID function, automatic constant temperature, over-temperature power failure, over temperature settings, dual thermostat control, leakage protection function, the internal temperature difference of ± 3 degrees; other
Control circuit devices are controlled by Mitsubishi Electric; each piece of the furnace chamber air motor with 2 sets of transport, for a total of 12 units with 10-inch wheels shipped air damper, each loaded nine stainless steel heating pipes, each uniformly distributed in the furnace chamber 500KW
inside, each furnace temperature can be controlled separately, each piece easy to set different temperatures;
(4) Transmission parts: the use of imported stainless ste el mesh chain belt, head tail with active-passive conditioning drum, the middle has no power-dragging roller bearing to prevent the belt run edge.
drying equipment
The rotary drier(drying machine) is used for drying materials with a certain humidity or granularity It is applied to building m
Drier Technical Data:
Modelm
Diameter of Rotating Tube
(mm)
length of Rotating Tube
(m)
Slope
(a°)
Rotary Speed
(r/m)
Weight
(T)
Power
(Kw)
Capacity
(M3)
0.6×8
600
8
3-5
8
5.1
4
2.26
0.8×10
800
10
3-5
7.2
6.9
4
5.02
1.0×10
1000
10
3-5
6.73
7.5
5.5
7.85
1.2×12
1200
12
3-5
5.8
13.1
11
13.31
1.5×12
1500
12
3-5
4.8
22.3
15
21.2
2.2×14
2200
14
3-5
3.2
52.8
30
53.22
2.4×18
2400
18
3-5
3
73.3
37
81.43
2.4×24
2800
24
3-5
2.59
97
75
147.8
Drier Technical Data:
Modelm
Diameter of Rotating Tube
(mm)
length of Rotating Tube
(m)
Slope
(a°)
Rotary Speed
(r/m)
Weight
(T)
Power
(Kw)
Capacity
(M3)
0.6×8
600
8
3-5
8
5.1
4
2.26
0.8×10
800
10
3-5
7.2
6.9
4
5.02
1.0×10
1000
10
3-5
6.73
7.5
5.5
7.85
1.2×12
1200
12
3-5
5.8
13.1
11
13.31
1.5×12
1500
12
3-5
4.8
22.3
15
21.2
2.2×14
2200
14
3-5
3.2
52.8
30
53.22
2.4×18
2400
18
3-5
3
73.3
37
81.43
2.4×24
2800
24
3-5
2.59
97
75
147.8
hot sell!!! rotary drier in Southern Asian countries
1.High dry capacity,
2.Low energy consumption,
3.Easy operation,
4.high output,Drier
Rotary Drum Drying Machine / Rotary Drier
I. Drying machine application:
Rotary Drum Drying Machine is widely used in building materials, metallurgy, chemical industry and cement industry, which is widely used to dry the stuff such as limestone, coal powder, slag and clay
.
II. Main Structure of Drying machine:
It mainly consists of revolving part, raising stuff plate, driving device, supporting device and seal ring.
III. Main features:
1. Reasonable design
2. High-efficiency
3. Low consumption, energy saving
4. Easy to maintain
5. Easy to operate
Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials ar e fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Parameters:
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kw)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x8000
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2400x20000
3-5
1.5-5
≤800
37
18-30
60
3000x20000
3-5
1.5-5
≤800
55
25-35
78
3000x25000
3-5
1.5-5
≤800
75
32-40
104.9
2.Low energy consumption,
3.Easy operation,
4.high output,Drier
Rotary Drum Drying Machine / Rotary Drier
I. Drying machine application:
Rotary Drum Drying Machine is widely used in building materials, metallurgy, chemical industry and cement industry, which is widely used to dry the stuff such as limestone, coal powder, slag and clay
.
II. Main Structure of Drying machine:
It mainly consists of revolving part, raising stuff plate, driving device, supporting device and seal ring.
III. Main features:
1. Reasonable design
2. High-efficiency
3. Low consumption, energy saving
4. Easy to maintain
5. Easy to operate
Working Principle:
The auto-combustion device provides heat resource for our rotary drier, which adopts down-flow heating method. When the mineral materials ar e fed into the cylinder, it flows down as a result of gravity. Meanwhile, they are repetitively scattered in the air so that they are in full contact with the hot air. The material is thus dried gradually.
Technical Parameters:
Model (mm)
Inclination (%)
Rotate speed (r/min)
Air inlet temperature (°C)
Power (kw)
Production capacity(t/h)
Weight (t)
600x6000
3-5
3-8
≤700
3
0.5-1.5
2.9
800x8000
3-5
3-8
≤700
4
0.8-2.0
3.5
800x10000
3-5
3-8
≤700
4
0.8-2.5
4.5
1000x10000
3-5
3-8
≤700
5.5
1.0-3.5
5.6
1200x10000
3-5
3-8
≤700
7.5
1.8-5
14.5
1200x12000
3-5
3-8
≤700
11
2-6
14.8
1500x12000
3-5
2-6
≤800
15
3.5-9
17.8
1800x12000
3-5
2-6
≤800
18
5-12
25
2200x12000
3-5
1.5-6
≤800
18.5
6-15
33
2200x18000
3-5
1.5-6
≤800
22
10-18
53.8
2200x20000
3-5
1.5-6
≤800
30
12-20
56
2400x20000
3-5
1.5-5
≤800
37
18-30
60
3000x20000
3-5
1.5-5
≤800
55
25-35
78
3000x25000
3-5
1.5-5
≤800
75
32-40
104.9
LGZ-A series high-speed centrifugal spray drying machine
LGZ-A series high-speed centrifugal spray drying maching machine
LGZ-A
series high-speed centrifugal spray drying maching machines are capable of spray-drying solution, emulsion, suspension and paste into powder in high efficiency and less processes . Dried materials can remain original colou, taste and fragrance as well sa provide a good dissolvability and high purity. The machines have a good working condition and can be operated automatically. They are widely used in chemical , petrochemical, metallurgical , ceramic, food, pharmaceutical, construction and forestry chemical industries, etrc. the equipment is also applide for cold-forming and granulating special materials of polyethylene wax, bio-fertilizer, compound fertilizer,etc after being heating and melting.
Technical parameters
model/parameters
LGZ
5
25
50
150
300-2000
inlet temperature
350
outlet temperature
80-90
max water evaporation ---kg/h
5
25
50
150
300-2000
transmission
compressed air
mecranical
rotate speed R.P.M
25000
22000
18000
18000
18000-10000
spray tray dia (mm)
50
102
120
150
180-270
heat fountain
electricity
electricity+steam
electricity+steam
fuel,coal gas
electricity+steam
fuel,coal gas
user self chosen
ele heat upmax power KW
12
31.5
72
99
.
exterior measure
length×width×high(m)
2.2×1.8×2.2
3×2.7×4.26
3.7×3.2×5.1
5.5×4.5×7
according to actual condition
according to the material design, according to actual condition
LGZ-A
series high-speed centrifugal spray drying maching machines are capable of spray-drying solution, emulsion, suspension and paste into powder in high efficiency and less processes . Dried materials can remain original colou, taste and fragrance as well sa provide a good dissolvability and high purity. The machines have a good working condition and can be operated automatically. They are widely used in chemical , petrochemical, metallurgical , ceramic, food, pharmaceutical, construction and forestry chemical industries, etrc. the equipment is also applide for cold-forming and granulating special materials of polyethylene wax, bio-fertilizer, compound fertilizer,etc after being heating and melting.
Technical parameters
model/parameters
LGZ
5
25
50
150
300-2000
inlet temperature
350
outlet temperature
80-90
max water evaporation ---kg/h
5
25
50
150
300-2000
transmission
compressed air
mecranical
rotate speed R.P.M
25000
22000
18000
18000
18000-10000
spray tray dia (mm)
50
102
120
150
180-270
heat fountain
electricity
electricity+steam
electricity+steam
fuel,coal gas
electricity+steam
fuel,coal gas
user self chosen
ele heat upmax power KW
12
31.5
72
99
.
exterior measure
length×width×high(m)
2.2×1.8×2.2
3×2.7×4.26
3.7×3.2×5.1
5.5×4.5×7
according to actual condition
according to the material design, according to actual condition
Spray-drying equipment
drying equipmentn solution, emulsion, suspension, paste liquid spraydryingequipment of materials, widely used in chemical, food
Spray-drying equipment is mainly used for the solution, emulsion, suspension, paste liquid spray-drying of materials, widely used in chemical, food, medicine, ceramics, green waste, biological and chemical, metallurgical and other industries.
The liquid material becomes very fine drips under the centeifugal force in the equipment, enlarging enormously the surface area of the material.It forms instantly the dried products once these drips contact with hot air.
The advantages are fast drying, high efficiency, easy operation, can maintain the original quality products, high product purity, production environment. Centrifugal Spray Dryer for the lower temperature materials, especially heat-sensitive materials dry, centrifugal Spray has a good dispersibility, fluidity and solubility, usually applies to the following four categories of products: 1)chemical industry: such as detergents, plastics, resins, dyes, pigments, agricultural type, fertilizer type, ceramics materials, mineral extracts, ordinary inorganic and organic chemicals, and other special applications;
2)food industry: dairy products, such as category, eggs, beverages, spices, vegetable protein, fruit and vegetables, carbohydrates and so on;
3)pharmaceutical and biochemical industries: such as enzymes, antibiotics, serum, vaccines, plasma substitutes, yeast, vitamins, medicinal gum, etc.;
4)slaughter industry and fisheries: such as slaughterhouse by-products, fish products.
Our prototype is available for customers samples
Spray-drying equipment is mainly used for the solution, emulsion, suspension, paste liquid spray-drying of materials, widely used in chemical, food, medicine, ceramics, green waste, biological and chemical, metallurgical and other industries.
The liquid material becomes very fine drips under the centeifugal force in the equipment, enlarging enormously the surface area of the material.It forms instantly the dried products once these drips contact with hot air.
The advantages are fast drying, high efficiency, easy operation, can maintain the original quality products, high product purity, production environment. Centrifugal Spray Dryer for the lower temperature materials, especially heat-sensitive materials dry, centrifugal Spray has a good dispersibility, fluidity and solubility, usually applies to the following four categories of products: 1)chemical industry: such as detergents, plastics, resins, dyes, pigments, agricultural type, fertilizer type, ceramics materials, mineral extracts, ordinary inorganic and organic chemicals, and other special applications;
2)food industry: dairy products, such as category, eggs, beverages, spices, vegetable protein, fruit and vegetables, carbohydrates and so on;
3)pharmaceutical and biochemical industries: such as enzymes, antibiotics, serum, vaccines, plasma substitutes, yeast, vitamins, medicinal gum, etc.;
4)slaughter industry and fisheries: such as slaughterhouse by-products, fish products.
Our prototype is available for customers samples
Subscribe to:
Comments (Atom)